This journal is a member of the Committee on Publication Ethics (COPE).
International Journal of Space Structures is a peer-reviewed journal, with the aim to provide an international forum for the interchange of information on all aspects of analysis, design and construction of space structures.
The scope of the journal encompasses structures such as single-, double- and multi-layer grids, barrel vaults, domes, towers, folded plates, radar dishes, tensegrity structures, stressed skin assemblies, foldable structures, pneumatic systems and cable arrangements. No limitation on the type of material is imposed and the scope includes structures constructed in steel, aluminium, timber, concrete, plastics, paperboard and fabric.
The journal aims at striking a balance between theory and practice and creating a platform for exchange of information between structural engineers, architects, civil engineering contractors, system manufacturers and research workers in academic and non-academic establishments.
The journal includes regular reviews of technical publications, books and trade literature. Also included is information on recently built important space structures, recently held conferences and forthcoming events of interest.
|Prof. Sigrid Adriaenssens||Princeton University, USA|
|Prof. Olivier Baverel||ENSAG / GSA / NAVIER / Ecole des Ponts ParisTech, France|
|Dr. Alireza Behnejad||University of Surrey, UK|
|John Chilton||University of Nottingham, UK|
|Zygmunt Stanislaw Makowski†||University of Surrey, UK|
|René Motro||Université de Montpellier, France|
|Hoshyar Nooshin||University of Surrey, UK|
|Prof. Bernard Maurin||Université de Montpellier, France|
|John F. Abel||Cornell University, USA|
|Hojjat Adeli||The Ohio State University, USA|
|Faris Albermani||The University of Queensland, Australia|
|Kai-Uwe Bletzinger||Technische Universität München, Germany|
|Philippe Block||ETH Zurich, Switzerland|
|R. R. Bradshaw||Engineer, USA|
|Maurizio Brocato||ENS d'Architecture Paris-Malaquais, France|
|Alberto Domingo||Universidad Politécnica de Valencia, Spain|
|Cyril Douthe||Navier, Ecole des Ponts, France|
|David Dureisseix||Institut National des Sciences Appliquées de Lyon, France|
|F. Flemming||Søren Jensen Consulting Engineers, Denmark|
|J. Francois Gabriel||Syracuse University, USA|
|Charis Gantes||National Technical University of Athens, Greece|
|Christoph Gengnagel||Universität der Künste Berlin, Germany|
|Simon Guest||University of Cambridge, UK|
|Ariel Hanaor||Technion-Israel Institute of Technology, Israel|
|Kriztian Hincz||Budapest University of Technology and Economics, Hungary|
|Pieter Huybers||Structural Engineer, Netherlands|
|Shiro Kato||Toyohashi University of Technology, Japan|
|Haresh Laivani||Pratt Institute New York, USA|
|Tien T. Lan||Chinese Academy of Building Research, China|
|Carlos Lázaro||Universitat Politècnica de València, Spain|
|M. Levy||Engineer, USA|
|K. Linkwitz||Engineer, Germany|
|Shahrokh Maalek||University of Tehran, Iran|
|Samar Malek||United States Naval Academy, USA|
|Ramesh B. Malla||University of Connecticut, USA|
|Allan McRobie||University of Cambridge, UK|
|Jan B. Obrebski||Warsaw University of Technology, Poland|
|Hiroshi Ohmori||Nagoya University, Japan|
|Juan Gerardo Oliva-Salinas||Universidad Nacional Autónoma de México, Mexico|
|John Orr||University of Cambridge, UK|
|Rivka E. Oxman||Technion - Israel Institute of Technology, Israel|
|Manolis Papadrakakis||National Technical University of Athens, Greece|
|Ruy Pauletti||University of Sao Paulo, Brazil|
|Sergio Pellegrino||California Institute of Technology, USA|
|Alberto Pugnale||Melbourne School of Design, Australia|
|Ekkehard Ramm||University of Stuttgart, Germany|
|Landolf Rhode-Barbarigos||Miami University, USA|
|Jaime Sanchez-Alvarez||Lindner Steel & Glass, Germany|
|Shizhao Shen||Harbin Institute of Technology, China|
|Paul Shepherd||University of Bath, UK|
|N. Subramanian||Engineer, USA|
|Toru Takeuchi||Tokyo Institute of Technology, Japan|
|Tibor Tarnai||Budapest University of Technology and Economics, Hungary|
|Yves Weinand||Ecole Polytechnique Fédérale de Lausanne, Switzerland|
|Christopher Williams||University of Bath, UK|
|Suduo Xue||Beijing University of Technology, China|
This Journal is a member of the Committee on Publication Ethics
Please read the guidelines below then visit the Journal’s submission site https://mc.manuscriptcentral.com/sps to upload your manuscript. Please note that manuscripts not conforming to these guidelines may be returned.
Only manuscripts of sufficient quality that meet the aims and scope of International Journal of Space Structures will be reviewed.
There are no fees payable to submit or publish in this journal.
As part of the submission process you will be required to warrant that you are submitting your original work, that you have the rights in the work, that you are submitting the work for first publication in the Journal and that it is not being considered for publication elsewhere and has not already been published elsewhere, and that you have obtained and can supply all necessary permissions for the reproduction of any copyright works not owned by you.
- What do we publish?
1.1 Aims & Scope
1.2 Article types
1.3 Writing your paper
- Editorial policies
2.1 Peer review policy
2.5 Declaration of conflicting interests
2.6 Research Data
- Publishing policies
3.1 Publication ethics
3.2 Contributor's publishing agreement
3.3 Open access and author archiving
- Preparing your manuscript
4.2 Artwork, figures and other graphics
4.3 Supplementary material
4.4 Reference style
4.5 English language editing services
- Submitting your manuscript
5.2 Information required for completing your submission
- On acceptance and publication
6.1 SAGE Production
6.2 Online First publication
6.3 Access to your published article
6.4 Promoting your article
- Further information
Before submitting your manuscript to International Journal of Space Structures, please ensure you have read the Aims & Scope
Invited review articles
Letters to the Editor
Manuscripts should not normally exceed 6,000 words. The main body of the paper is to be preceded by an abstract of around 100 words, as well as a list of 4 to 8 keywords.
Submissions to the journal should present a significant contribution relating to a theoretical or practical aspect of analysis, design, or construction of space structures.
The SAGE Author Gateway has some general advice and on how to get published, plus links to further resources.
1.3.1 Make your article discoverable
When writing up your paper, think about how you can make it discoverable. The title, keywords and abstract are key to ensuring readers find your article through search engines such as Google. For information and guidance on how best to title your article, write your abstract and select your keywords, have a look at this page on the Gateway: How to Help Readers Find Your Article Online
International Journal of Space Structures operates a conventional single-blind reviewing policy in which the reviewer’s name is always concealed from the authors.
The Editorial Team conducts a preliminary assessment of each paper submitted to International Journal of Space Structures before it is sent out to reviewers. Papers that are marginal to the scope of the journal and/or below the minimum standard of the journal will be declined directly without going through the peer-review process. A manuscript that passes the preliminary assessment is then sent to reviewers to assess its suitability for publication in the journal. All manuscripts are reviewed as rapidly as possible, and an editorial decision is generally reached within 6-8 weeks of submission.International Journal of Space Structures is committed to delivering high quality, fast peer-review for your paper, and as such has partnered with Publons. Publons is a third party service that seeks to track, verify and give credit for peer review. Reviewers for International Journal of Space Structures can opt in to Publons in order to claim their reviews or have them automatically verified and added to their reviewer profile. Reviewers claiming credit for their review will be associated with the relevant journal, but the article name, reviewer’s decision and the content of their review is not published on the site. For more information visit the Publons website.
Papers should only be submitted for consideration once consent is given by all contributing authors. Those submitting papers should carefully check that all those whose work contributed to the paper are acknowledged as contributing authors.
The list of authors should include all those who can legitimately claim authorship. This is all those who:
- Made a substantial contribution to the concept or design of the work; or acquisition, analysis or interpretation of data,
- Drafted the article or revised it critically for important intellectual content,
- Approved the version to be published,
- Each author should have participated sufficiently in the work to take public responsibility for appropriate portions of the content.
Authors should meet the conditions of all of the points above. When a large, multicentre group has conducted the work, the group should identify the individuals who accept direct responsibility for the manuscript. These individuals should fully meet the criteria for authorship.
Acquisition of funding, collection of data, or general supervision of the research group alone does not constitute authorship, although all contributors who do not meet the criteria for authorship should be listed in the Acknowledgments section. Please refer to the International Committee of Medical Journal Editors (ICMJE) authorship guidelines for more information on authorship.
All contributors who do not meet the criteria for authorship should be listed in an Acknowledgements section. Examples of those who might be acknowledged include a person who provided purely technical help, or a department chair who provided only general support.
Any acknowledgements should appear first at the end of your article prior to your Declaration of Conflicting Interests (if applicable), any notes and your References.
2.3.1 Writing assistance
Individuals who provided writing assistance, e.g. from a specialist communications company, do not qualify as authors and so should be included in the Acknowledgements section. Authors must disclose any writing assistance – including the individual’s name, company and level of input – and identify the entity that paid for this assistance. It is not necessary to disclose use of language polishing services.
International Journal of Space Structures requires all authors to acknowledge their funding in a consistent fashion under a separate heading. Please visit the Funding Acknowledgements page on the SAGE Journal Author Gateway to confirm the format of the acknowledgment text in the event of funding, or state that: This research received no specific grant from any funding agency in the public, commercial, or not-for-profit sectors.
It is the policy of International Journal of Space Structures to require a declaration of conflicting interests from all authors enabling a statement to be carried within the paginated pages of all published articles.
Please ensure that a ‘Declaration of Conflicting Interests’ statement is included at the end of your manuscript, after any acknowledgements and prior to the references. If no conflict exists, please state that ‘The Author(s) declare(s) that there is no conflict of interest’. For guidance on conflict of interest statements, please see the ICMJE recommendations here
At SAGE we are committed to facilitating openness, transparency and reproducibility of research. Where relevant, International Journal of Space Structures encourages authors to share their research data in a suitable public repository subject to ethical considerations and where data is included, to add a data accessibility statement in their manuscript file. Authors should also follow data citation principles. For more information please visit the Research Data Sharing Policies, which includes information about SAGE’s partnership with the data repository Figshare.
SAGE is committed to upholding the integrity of the academic record. We encourage authors to refer to the Committee on Publication Ethics’ International Standards for Authors and view the Publication Ethics page on the SAGE Author Gateway
International Journal of Space Structures and SAGE take issues of copyright infringement, plagiarism or other breaches of best practice in publication very seriously. We seek to protect the rights of our authors and we always investigate claims of plagiarism or misuse of published articles. Equally, we seek to protect the reputation of the journal against malpractice. Submitted articles may be checked with duplication-checking software. Where an article, for example, is found to have plagiarised other work or included third-party copyright material without permission or with insufficient acknowledgement, or where the authorship of the article is contested, we reserve the right to take action including, but not limited to: publishing an erratum or corrigendum (correction); retracting the article; taking up the matter with the head of department or dean of the author's institution and/or relevant academic bodies or societies; or taking appropriate legal action.
3.1.2 Prior publication
If material has been previously published it is not generally acceptable for publication in a SAGE journal. However, there are certain circumstances where previously published material can be considered for publication. Please refer to the guidance on the SAGE Author Gateway or if in doubt, contact the Editor at the address given below.
Before publication, SAGE requires the author as the rights holder to sign a Journal Contributor’s Publishing Agreement. SAGE’s Journal Contributor’s Publishing Agreement is an exclusive licence agreement which means that the author retains copyright in the work but grants SAGE the sole and exclusive right and licence to publish for the full legal term of copyright. Exceptions may exist where an assignment of copyright is required or preferred by a proprietor other than SAGE. In this case copyright in the work will be assigned from the author to the society. For more information please visit the SAGE Author Gateway
International Journal of Space Structures offers optional open access publishing via the SAGE Choice programme. For more information please visit the SAGE Choice website. For information on funding body compliance, and depositing your article in repositories, please visit SAGE Publishing Policies on our Journal Author Gateway.
The preferred format for your manuscript is Word. LaTeX files are also accepted. Word and (La)Tex templates are available on the Manuscript Submission Guidelines page of our Author Gateway.
For guidance on the preparation of illustrations, pictures and graphs in electronic format, please visit SAGE’s Manuscript Submission Guidelines
Figures supplied in colour will appear in colour online regardless of whether or not these illustrations are reproduced in colour in the printed version. For specifically requested colour reproduction in print, you will receive information regarding the costs from SAGE after receipt of your accepted article.
This journal is able to host additional materials online (e.g. datasets, podcasts, videos, images etc) alongside the full-text of the article. For more information please refer to our guidelines on submitting supplementary files
International Journal of Space Structures adheres to the SAGE Vancouver reference style. View the SAGE Vancouver guidelines to ensure your manuscript conforms to this reference style.
Authors seeking assistance with English language editing, translation, or figure and manuscript formatting to fit the journal’s specifications should consider using SAGE Language Services. Visit SAGE Language Services on our Journal Author Gateway for further information.
International Journal of Space Structures is hosted on SAGE Track, a web based online submission and peer review system powered by ScholarOne™ Manuscripts. Visit https://mc.manuscriptcentral.com/sps to login and submit your article online.
IMPORTANT: Please check whether you already have an account in the system before trying to create a new one. If you have reviewed or authored for the journal in the past year it is likely that you will have had an account created. For further guidance on submitting your manuscript online please visit ScholarOne Online Help.
As part of our commitment to ensuring an ethical, transparent and fair peer review process SAGE is a supporting member of ORCID, the Open Researcher and Contributor ID. ORCID provides a unique and persistent digital identifier that distinguishes researchers from every other researcher, even those who share the same name, and, through integration in key research workflows such as manuscript and grant submission, supports automated linkages between researchers and their professional activities, ensuring that their work is recognized.
The collection of ORCID iDs from corresponding authors is now part of the submission process of this journal. If you already have an ORCID iD you will be asked to associate that to your submission during the online submission process. We also strongly encourage all co-authors to link their ORCID ID to their accounts in our online peer review platforms. It takes seconds to do: click the link when prompted, sign into your ORCID account and our systems are automatically updated. Your ORCID iD will become part of your accepted publication’s metadata, making your work attributable to you and only you. Your ORCID iD is published with your article so that fellow researchers reading your work can link to your ORCID profile and from there link to your other publications.
You will be asked to provide contact details and academic affiliations for all co-authors via the submission system and identify who is to be the corresponding author. These details must match what appears on your manuscript. At this stage please ensure you have included all the required statements and declarations and uploaded any additional supplementary files (including reporting guidelines where relevant).
Please also ensure that you have obtained any necessary permission from copyright holders for reproducing any illustrations, tables, figures or lengthy quotations previously published elsewhere. For further information including guidance on fair dealing for criticism and review, please see the Copyright and Permissions page on the SAGE Author Gateway
Your SAGE Production Editor will keep you informed as to your article’s progress throughout the production process. Proofs will be sent by PDF to the corresponding author and should be returned promptly. Authors are reminded to check their proofs carefully to confirm that all author information, including names, affiliations, sequence and contact details are correct, and that Funding and Conflict of Interest statements, if any, are accurate. Please note that if there are any changes to the author list at this stage all authors will be required to complete and sign a form authorising the change.
Online First allows final articles (completed and approved articles awaiting assignment to a future issue) to be published online prior to their inclusion in a journal issue, which significantly reduces the lead time between submission and publication. Visit the SAGE Journals help page for more details, including how to cite Online First articles.
SAGE provides authors with online access to their final article.
Publication is not the end of the process! You can help disseminate your paper and ensure it is as widely read and cited as possible. The SAGE Author Gateway has numerous resources to help you promote your work. Visit the Promote Your Article page on the Gateway for tips and advice. In addition, SAGE is partnered with Kudos, a free service that allows authors to explain, enrich, share, and measure the impact of their article. Find out how to maximise your article’s impact with Kudos.
Any correspondence, queries or additional requests for information on the manuscript submission process should be sent to the International Journal of Space Structures editorial office as follows: